Air-blast anti-fouling cleaning for aquatic optical sensors

Zhang Yali, Naiqian Zhang

Abstract


In order to solve the problem of fouling of submerged optical instruments, an air-blast cleaning mechanism was integrated into an optical sensor used for measuring suspended sediment concentration (SSC) in natural waters. Laboratory experiments in a manually created fouling environment were conducted to observe the fouling process on sensor cases made of different materials, and to verify the effectiveness of air-blast cleaning in reducing fouling. Results indicated that sensors with an aluminum case experienced more serious bio-fouling than that with polyethylene case, and the air-blast cleaning mechanism was capable of reducing fouling effect on sensor signals. So the submerged optical instruments should avoid using metal materials. The duration and frequency of air-blast cleaning can be determined and adjusted depending on actual field conditions.
Keywords: optical sensor, aquatic sensor, anti-fouling, bio-fouling, air-blast cleaning, sediment
DOI: 10.3965/j.ijabe.20150806.1853

Citation: Zhang Y L, Zhang N Q. Air-blast anti-fouling cleaning for aquatic optical sensors. Int J Agric & Biol Eng, 2015; 8(6): 128－135.

Keywords


optical sensor, aquatic sensor, anti-fouling, bio-fouling, air-blast cleaning, sediment

Full Text:

PDF

References


EBSCO. Glossary of Terms: Flowmeter Specs.

Birmingham, AL: Ebsco Industries Inc. Available at: http://www.flowcontrolnetwork.com/articles/glossary-of-terms-flowmeter-specs. Accessed on [2015-01-10].

CTI. Introduction to Fouling. Houston, TX: Champion Technologies, Inc. Available at: http://www.champion- environ.com/marine-biofouling.asp. Accessed on [2015-01- 10].

Delort E, Watanabe N, Etoh H, Sakata K, Ceccaldi H J. Analysis of initial fouling process in coastal environment: Effects of settlement, attachment, and metamorphosis promoters. Marine Biotechnology, 2000; 2: 224–230.

Lillycrop L S, Howell G L. In-situ Long-term Deployment of Water Quality Sensors Adversely Affected by Biological Fouling. Proceedings of OCEANS 96 MTS/IEEE Prospects for the 21st Century Conference, 1996, 2. pp. 693–697.

Sherwood C R, Coats D, Walls B. Current and suspended sediment measurements on the central California continental shelf. Proceedings of OCEANS '89. New York, NY: IEEE. 1989. pp. 320–325.

Manov D V, Chang G C, Dickey T D. Methods for reducing biofouling of moored optical sensors. Journal of Atmospheric and Oceanic Technology, 2004; 21(6): 958–967.

McLean S, Schofield B, Zibordi G, Lewis M, Hooker S, Weidemann A. Field Evaluation of Anti-biofouling Compounds on Optical Instrumentation. In Proc. SPIE, 1997; 2963: 708–713.

Flemming H C, Tamachkiarowa A, Klahre J, Schmitt J. Monitoring of Fouling and Biofouling in Technical Systems. Water Science and Technology, 1998; 38(8-9): 291–298.

RWT. Royce JC Series Compressor Cleaning Systems. College Station, Texas: Royce Technologies. Available at: http://www.roycetechnologies.com/refdocs/Royce_JC.pdf. Accessed on [2015-01-10].

ATI. Highly Sensitive Turbidity Measurement, Unmatched Zero Stability: Model A15/76 Turbidity Monitor. Collegeville, PA: Analytical Technology, Inc. Available at: http://pdf.directindustry.com/pdf/analytical-technology/analytical-technology-a15-76-turbidity-monitor/31436-88896.html. Accessed on [2015-01-02].

Ridd P, Larcombe P. Biofouling control for optical backscatter suspended sediment sensors. Marine Geology, 1994; 116: 255–258.

FTS. DTS-12 Digital Turbidity Sensor. Victoria, BC, Canada: Forest Technology Systems Ltd. Available at: https://s3.amazonaws.com/HYD_docs/DTS-12_brochure_web.pdf. Accessed on [2015-01-10].

FEI. The YSI Wiped Turbidity Sensor: An Overview of Turbidity, Nephelometry and an Advancement in In Situ Measurement of Turbidity. Alpha, OH: Fondriest Environmental, Inc. Available at: www.fondriest.com/pdf/ ysi_wiped_turbidity.pdf. Accessed on [2015-01-12].

WTW. Sensors for Turbidity and Suspended Solids Measurement. Weilheim, Germany: WTW Wissenschaftlich- Technische. Available at: www.wtw.de/en/products/online/ turbidity-suspended-solids-measurement/iq-sensors.html. Accessed on [2015-01-10].

Edgerton G A. Oceanographic sensor with in-situ cleaning and bio-fouling prevention system. U.S. Patent No. 4092858, 1977.

Destefani J. Ultrasonic Cleaning Saves Time, Money. Products Finishing, 2007; 71(6): 26.

Buttmann M. Suspended solids measurement as reliable process control. Proceedings of ISA TECH EXPO Technology Update Conference, Houston, TX: Instrument Society of America, 2001; 413(1): 563–572.

Postolache O A, Girao P M B S, Pereira J M D, Ramos H M G. Multibeam optical system and neural processing for turbidity measurement. IEEE Sensors Journal, 2007; 7(5): 677–684.

Zhang Y. An optical sensor for in-stream monitoring of suspended sediment concentration. Doctoral Dissertation. Manhattan, Kansas: Kansas State University, Department of Biological and Agricultural Engineering, 2009.

Stoll Q M. Design of a real-time, optical sediment concentration sensor. MS thesis. Manhattan, Kansas: Kansas State University, Department of Biological and Agricultural Engineering, 2004.




Copyright (c)



2023-2026 Copyright IJABE Editing and Publishing Office