Design and test of one-rotor orchard horizontal rotary rake based on tine movement trajectory analysis

Xiaohui Lei, Xiaolan Lyu, Yongzhe Shen, Shicheng Qian, Jin Zeng, Quanchun Yuan, Yannan Qi, Wanxi Huang, Zhengbao Ma

Abstract


To solve the problem of effective utilization of orchard green fertilizer, a small one-rotor orchard horizontal rotary rake (OHRR) was developed, which is used for grass collection in the mowing agronomic section of orchard management. In the working process, the disc drives the arms rotating around the vertical shaft, the guide cam that is fixed to the vertical shaft controls tine movement, and the tines turn to different inclination angles in different positions. The kinematic validation model of OHRR was built based on the theory that there is no gap or small overlap between the two adjacent working areas of the tines. This model determines the relationship between the advancing speed, disc rotational speed, rotation radius, arm number, and tine working width. The leakage and repeating rate of OHRR virtual prototype were calculated by tines movement trajectories analysis in multi-body dynamics simulation. Box-Behnken three-factor and three-level test plans for advancing speed, disc rotational speed, and tine working width were designed to obtain the optimal operation parameters of the OHRR: advancing speed was 11.16 km/h, disc rotational speed was 6.98 rad/s, and tines working width was 0.3 m. Taking labor working as the control group, OHRR field tests were evaluated by four indices: strip density, leakage rate, working efficiency, and profitable area. Field tests results showed that the leakage rate of OHRR was 4.56%, which meets the requirements of national standard JB/T10905. The strip density, width, and height of OHRR were 29.44 kg/m3, 0.5 m, and 0.25 m, respectively. These data can provide support for the subsequent loading and transportation operation. The profitable area of OHRR was 6.7 hm2, which is suitable for large-scale mechanized orchard management.
Key words: orchard; rake; tine movement model; performance parameter; trajectory optimization
DOI: 10.25165/j.ijabe.20251802.9194

Citation: Lei X H, Lyu X, Shen Y Z, Qian S C, Zeng J, Yuan Q C, et al. Design and test of one-rotor orchard horizontal rotary
rake based on tine movement trajectory analysis. Int J Agric & Biol Eng, 2025; 18(2): 115–123.

Keywords


orchard; rake; tine movement model; performance parameter; trajectory optimization

Full Text:

PDF

References


Xiang Y Z, Li Y, Liu Y, Zhang S Y, Yue X J, Yao B, et al. Factors shaping soil organic carbon stocks in grass covered orchards across China: a meta-analysis. Science of the Total Environment, 2022; 807(2): 150632.

Pausic A, Tojnko S, Lesnik M. Permanent, undisturbed, in-row living mulch: A realistic option to replace glyphosate-dominated chemical weed control in intensive pear orchards. Agriculture Ecosystems & Environment, 2021; 318: 107502.

Mo M H, Liu Z, Yang J, Song Y J, Tu A G, Liao K T, et al. Water and sediment runoff and soil moisture response to grass cover in sloping citrus land, southern China. Soil and Water Research, 2019; 14(1): 10–21.

Wu Y P, Wang X, Hu R G, Zhao J S, Jiang Y B. Responses of soil microbial traits to ground cover in citrus orchards in central china. Microorganisms, 2021; 9(12): 2507.

Li X L, Chu Y N, Jia Y H, Yue H Y, Han Z H, Wang Y. Changes to bacterial communities and soil metabolites in an apple orchard as a legacy effect of different intercropping plants and soil management practices. Frontiers in Microbiology, 2022; 13: 956840.

Lei X H, Qi Y N, Zeng J, Yuan Q C, Chang Y H, Lyu X L. Development of unilateral obstacle-avoiding mower for Y-trellis pear orchard. Int J Agric & Biol Eng, 2022; 15(1): 71–78.

Bai G S, Zhou N, Shao F Q, Du J H, Guo J P. Effects of self-sown grass on soil nitrogen and apple fruit quality in the Weibei dry platean. Transactions of the CSAE, 2021; 37(10): 100–109.

Duan Z L, Wang C G, Song Y. Effects of different green manure cultivation models on soil physical properties, apple quality and yield in fruit regions of Northern Shaanxi. China Fruits, 2022; 1: 24–28.

Wang C W, Zhang N, Bao D S, Meng Y G, Zhang L. Comparative analysis of typical rake at home and abroad and development suggestions of domestic rake. Agricultural Engineering, 2021; 11(2): 6–11. (in Chinese)

Yang L. Development status and tendency of rake swather. Journal of Agricultural Mechanization, 2020; 41(4): 57–64.

Liu X H, Li J Y, Li B H. Design and test of 9LX-5.0 type double rotor horizontal rotating rake. Agricultural Development & Equipments, 2018; 1: 102–103. (in Chinese)

Wang Z Y, Guo Z P, Wu W L, He Z Q. Fatigue life analysis of spring teeth of double rotor horizontal rotating rake. Journal of Agricultural Mechanization Research, 2022; 44(10): 14–18.

Zhai G X, He G, Wang Q, Wang Z H, Yang L, Dong J J. Innovative design of ground profile mechanism of horizontal rotary rake. Farm Machinery, 2021(12): 64–68.

Wang D C, He C B, Wu H J, You Y, Wang G H. Review of alfalfa full-mechanized production technology. Transactions of the CSAM, 2017; 48(8): 1–25.

Paraforos D, Griepentrog H, Vougioukas S. Modeling and simulation of a four-rotor rake loading for predicting accumulated fatigue damage: a markov regime-switching approach. Applied Engineering in Agriculture, 2018; 34(2): 317–325.

Abby E, Craig C, Daniel J, Marvin H, Daniel M, Krishona L, et al. Hay rake-type effect on ash and forage nutritive values of alfalfa hay. Crop Economics, Production & Management, 2017; 109(5): 2163–2171.

Khalid A. Impact of raking and baling patterns on alfalfa hay dry matter and quality losses. Saudi Journal of Biological Sciences, 2018(25): 1040–1048.

National Development and Reform Commission, The rotary rake, 2008; JB/T 10905-2008. (in Chinese)

Li T, Qiu Q, Zhao C J, Xie F. Task planning of multi-arm harvesting robots for high-density dwarf orchards. Transactions of the CSAE, 2021; 37(2): 1–10.

Kang F, Tong S Y, Zhang H S, Li W B, Chen Z J, Zheng Y J. Analysis and experiments of reciprocating cutting parameters for apple tree branches. Transactions of the CSAE, 2020; 36(16): 9–16.

Hu F J, Yang H B, Sheng Z L, Luo H Y, Zhai X M, et al. Research progress of weed control in tea garden. Journal of Henan Agricultural Sciences, 2018; 47(10): 7–11.

Jiang H G, Zhang Y Z, Zhu X X, Li Y Y. A new barrier material for preventing weed proliferation in plantation of young tea bushes. Acta Tea Sinica, 2017; 58(4): 189–192. (in Chinese)

Zhao X, Ma X X, Liao H W, Xiong Y S, Xu Y D, Chen J N. Design of flower transplanting mechanisms based on double planet carrier non-circular gear train with complete rotation kinematic pair. Int J Agric & Biol Eng, 2022; 15(3): 9–15.

Zhou M L, Shan Y Y, Xue X L, Yin D Q. Theoretical analysis and development of a mechanism with punching device for transplanting potted vegetable seedlings. Int J Agric & Biol Eng, 2020; 13(4): 85–92.

Zhao X, Zhang X S, Wu Q P, Dai L, Chen J N. Research and experiment of a novel flower transplanting device using hybrid-driven mechanism. Int J Agric & Biol Eng, 2020; 13(2): 92–100.

Yu Z H, Huai S C, Wang W M. Leakage rate and optimization of working parameters for cylinder pickup collector based on spring-finger trajectory. Transactions of the CSAE, 2018; 34(4): 37–43.

Xu H Z, Tian D Y, Liu J D, Niu Z H, Li Q. Operation analysis and parameter optimization of drum type soil-covering device. Int J Agric & Biol Eng, 2021; 14(3): 123–129.

Hu H N, Li H W, Wang Q J, He J, Lu C Y, Wang Y B, et al. Anti-blocking performance of ultrahigh-pressure waterjet assisted furrow opener for no-till seeder. Int J Agric & Biol Eng, 2020; 13(2): 64–70.

Zhai G X, Liu G L, He G, Bao D S, Wang Q X, Zhang P. Design and experiment on the horizontal rotary rake. Journal of Agricultural Mechanization Research, 2014; 36(7): 168–173.

JB/T 9700-2013. Results of test methods for machines of hay harvesting. Ministry of Machine-Building Industry of the People’s Republic of China, 2013. (in Chinese)

GB/T 14247-2015. Rake testing methods. Inspection and Quarantine of the People’s Republic of China (AQSIQ), 2015. (in Chinese)

Lei X H, Lyu X L, Zhang M N, Lu D P, Wang S L, Chang Y H, et al. Performance evaluation of mechanical blossom thinning in trunk type pear orchard. Int J Agric & Biol Eng, 2021; 14(4): 106–112.

Zheng Y J, Jiang S J, Chen B T, Lü H T, Wan C, Kang F. Review on technology and equipment of mechanization in hilly orchard. Transactions of the CSAM, 2020; 51(11): 1–20. (in Chinese)




Copyright (c) 2025 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office